DEWALT DW735 13-Inch, Two Speed Thickness Planer

DEWALT DW735 13-Inch, Two Speed Thickness Planer Review

DEWALT DW735 13-Inch, Two Speed Thickness Planer Feature

• Powerful 15-AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
• Three knife cutter-head delivers 30-percent longer knife life and makes knife change faster and easier
• Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
• Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine

The DEWALT DW735 features a three-knife cutterhead and a powerful 15 amp motor that delivers 10,000 rpm. It offers quick, accurate depth adjustment and the convenience of knives that are both reversible and disposable. This fully featured portable planer makes it easy to create clean custom stock.

DW735 13-Inch Three Knife Two Speed Thickness Planer At a Glance: Powerful 15 amp motor Three-knife cutterhead operates at 10,000 rpm Dual speed allows 96 or 179 cuts per inch for fine finishes Disposable, reversible knives are long lasting and easy to change 1/8-inch maximum cut depth; 6-inch depth capacity; 13-inch width capacity Three-year limited warranty, one-year free service, 90-day money-back guarantee

15 amp motor operates at 10,000 rpm. View larger.

Dual-speed gear box is ideal for dimensioning and finishing work. View larger.

Powerful 15 Amp Motor for Clean Cuts
Benchtop planers are a long-term investment that allow you to save money over time by buying rough stock and dimensioning it yourself. They also make creating custom materials easier, which, in turn, makes getting great results easier.

The DW735 13-Inch Planer's powerful 15 amp motor can handle deep cuts in tough hardwoods. Its three-knife cutterhead and two-speed gearbox deliver 96 or 179 cuts per inch (cpi). Use 96 cpi when dimensioning material and 179 cpi for a finer finish.

Reversible, Disposable Knives for Convenience
The DEWALT DW734 uses razor sharp knives that are reversible and disposable. These knives last 30 percent longer than traditional disposable knives, helping you avoid costly and time-consuming resharpening.

For fast, easy, one-tool knife changes, a set of pins machined on the cutter-head goes through holes machined on the knife. This helps you quickly locate the fresh knife and refasten the knife clamp.

Large Capacity and Easy, Accurate Depth Adjustment
This planer's extra-long infeed and outfeed tables provide 33-1/2 inches of material support. A turret depth stop saves you time when setting the machine at commonly used depths.

In addition, the planer's material-removal gauge and extra-large thickness scale help ensure every pass is accurate. A four-column carriage lock drastically reduces the movement that causes material damage, or snipe, when planning near the end of a board.

This sturdy planer weighs 80 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 12-1/2 inches.

Fan-Assisted Chip Ejection for Dust Management
The DW735 features a Fan-Assisted Chip Ejection System with a motorized fan that breaks down debris as it leaves the cutterhead and blows it into one of the two dust shrouds (included). One shroud disperses the chips down onto the shop floor while the other provides a connection for a vacuum hose or dust-collector hose.

This sturdy planer weighs 92 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 13 inches.

The DW735 13-Inch Thickness Two-Speed Planer with Three-Knife Cutterhead also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box
DW735 DEWALT 13-Inch Thickness Two-Speed Planer with Three-Knife Cutterhead, dust-hose adapter, and dust-ejection chute.

The DW735 planer allows for fast, easy, one-tool knife changes.

Sometimes, half an inch makes all the difference. But that's not the only reason to step up to the 735. Its powerful 10,000 rpm motor will handle anything you feed it--oak, walnut, exotics--with absolute ease. The three-knife cutterhead will make 96 or 179 cuts per inch, depending on which speed setting you choose. Mess is minimized with the fan-assisted chip ejection, which literally vacuums chips off the cutter-head and blows them out the exhaust. The 735's automatic carriage lock will save you from snipe by reducing the movement that causes it--what a great idea. We also love the redesigned thickness scale--it's big and super-visible, even in poor lighting. Those who do repetitive cuts will appreciate the turret depth-stop; set your most-used cuts to it once and you're always assured of accuracy. The home woodworker will be thrilled, and the professional's expectations will be more than met. This is a winner.--Kris Jensen-Van Heste

DELTA 37-658 Set of 3 Knives for 37-190 and 37-195 Jointers

DELTA 37-658 Set of 3 Knives for 37-190 and 37-195 Jointers Review

DELTA 37-658 Set of 3 Knives for 37-190 and 37-195 Jointers Feature

• Set of three high-speed steel, case-hardened knives
• Made of high-speed steel for sharpness and durability
• Includes three knives

The DELTA 37-658 Set of 3 Knives are the standard replacement knives for the DELTA 37-190 and 37-195 Jointers. They are made of high-speed steel blades for durability and sharpness. The pack includes three knives.

Woodstock W1001 6-1/2-Inch Jointer Flange

Woodstock W1001 6-1/2-Inch Jointer Flange Review

Woodstock W1001 6-1/2-Inch Jointer Flange Feature

• Overall size: 8-1/4-Inch width by 8 1/4-Inch height by 2-1/2-Inch diameter
• Material thickness 3/32-Inch
• Flange is 3/4-Inch wide
• Outlet Diameter is 4-Inch overall

Made with Anti-Static Additive! * 4" Outlet. * 8-1/4" x 8-1/4" size. * Available in two sizes for all popular 6" and 8" jointers with cabinet stands.

Tersa 1961360 Tersa? R2000 Replacement Knives - Solid Carbide - 360mm Length; 2 Knives/Pkg

Tersa 1961360 Tersa? R2000 Replacement Knives - Solid Carbide - 360mm Length; 2 Knives/Pkg Review

Tersa 1961360 Tersa? R2000 Replacement Knives - Solid Carbide - 360mm Length; 2 Knives/Pkg Feature

• 360mm Length; 2 Knives/Pkg

These genuine Tersa? R2000 micrograin solid carbide replacement knives are most durable and recommended for laminated wood, hardwood like hickory and abrasive material. Features : ? Reversible? Quick knife change - no technical skills required? Low operation noise? Easy Maintenance? Knives clamped by centrifugal force and gib wedges - no screws? No need for knife adjustment - Tersa® cutter head maintains constant cutting circle

MARSHALLTOWN The Premier Line 85 5/8-Inch by 1/8-Inch Bit Grapevine Jointer

MARSHALLTOWN The Premier Line 85 5/8-Inch by 1/8-Inch Bit Grapevine Jointer Review

MARSHALLTOWN The Premier Line 85 5/8-Inch by 1/8-Inch Bit Grapevine Jointer Feature

• Forged from high grade tool steel and heat treated
• Straight true bit makes a clean "colonial" joint
• Unique double-ended design gives twice the wear as others
• 8 1/2" in length
• Bit size is 1/8"

Forged from high grade tool steel and heat treated. Straight true bit makes a clean 'colonial' joint. Double-ended design gives twice the wear as others.

Magnate R2K32202 125mm ( 4.92" ) Diameter Tersa? R2000 SYSTEM - 1-1/2" Bore; 220mm Length

Magnate R2K32202 125mm ( 4.92" ) Diameter Tersa? R2000 SYSTEM - 1-1/2" Bore; 220mm Length Review

Magnate R2K32202 125mm ( 4.92" ) Diameter Tersa? R2000 SYSTEM - 1-1/2" Bore; 220mm Length Feature

• 1-1/2" Bore; 220mm Length; 225mm Overall Length

These Tersa? R2000 heads are suitable for all types of shaper cutters and molders as long as the head can be fitted and secured with the spindle. However, to use R2000 Tersa?  head with your planer or jointer, modification is needed for most cases, therefore the brand and model of your planer or jointer is absolutely required with purchase order. Those require modification will somewhat delay shipment accordingly.  Other sizes are available upon request. Notes: 1 - All heads come with 4 HSS knives 2 - Maxium 9,000 rpm 3 - Maximum Feed Rate : 36 meter/min. (or 23-5/8"/sec) 4 - "Length" means the length of knives to go with.

Freud C400 6-1/8-by-11/16-by-1/8-Inch Jointer Knives, 3-Pack

Freud C400 6-1/8-by-11/16-by-1/8-Inch Jointer Knives, 3-Pack Review

Freud C400 6-1/8-by-11/16-by-1/8-Inch Jointer Knives, 3-Pack Feature

• Produces the smoothest cut
• Precision-machined for best results; pre-ground to a razor sharp edge
• Made from premium high-speed steel stock
• 3-pack of jointer knives
• Manufacturer's limited lifetime warranty

The Freud Difference
Freud manufactures some of the most innovative, technologically advanced woodworking tools and accessories in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo -- a combination of titanium and cobalt. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. By overseeing the entire manufacturing process from start to finish, Freud guarantees some of the highest quality, most advanced products in the industry.

About these Replacement Knives
These Freud 6-1/8-inch replacement jointer knives are designed for use with the Ryobi AP10. They're pre-ground to a razor sharp edge in order to produce the smoothest cut possible. Precision-machined for best results, these knives are made from premium high-speed steel stock for a keen edge and long life.

Key Tech Specs:

• 6-1/8 inches long
• 11/16-inch wide
• 1/8-inch thick

Warranty
This 3-pack of knives is covered by Freud's limited lifetime warranty. The Freud Difference Freud manufactures some of the most innovative, technologically advanced woodworking tools and accessories in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo -- a combination of titanium and cobalt. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. By overseeing the entire manufacturing process from start to finish, Freud guarantees some of the highest quality, most advanced products in the industry. About these Replacement Knives These Freud 6-1/8-inch replacement jointer knives are designed for use with the Ryobi AP10. They're pre-ground to a razor sharp edge in order to produce the smoothest cut possible. Precision-machined for best results, these knives are made from premium high-speed steel stock for a keen edge and long life. Key Tech Specs: 6-1/8 inches long 11/16-inch wide 1/8-inch thick Warranty This 3-pack of knives is covered by Freud's limited lifetime warranty.Produces the smoothest cutPrecision-machined for best results; pre-ground to a razor sharp edgeMade from premium high-speed steel stock3-pack of jointer knivesManufacturer's limited lifetime warranty

Jet 708801 JJ6-K 6-Inch Jointer Knife Set

Jet 708801 JJ6-K 6-Inch Jointer Knife Set Review

Jet 708801 JJ6-K 6-Inch Jointer Knife Set Feature

• Jointer knife set allows rapid cutting
• Produces a superior finish
• Constructed of high-speed steel
• Includes 3 knives
• 6-Inch in length

The Jet JJ6-K 6-Inch Jointer Knife Set allows rapid cutting while producing a superior finish. These jointer knives are constructed of high-speed steel. The set includes three knives. The Jet JJ6-K 6-Inch Jointer Knife Set allows rapid cutting while producing a superior finish. These jointer knives are constructed of high-speed steel. The set includes three knives.

JET 1610078 Mobile Base for Powermatic PJ882 Parallelogram Jointer

JET 1610078 Mobile Base for Powermatic PJ882 Parallelogram Jointer Review

JET 1610078 Mobile Base for Powermatic PJ882 Parallelogram Jointer Feature

• Heavy-Duty
• Easy Jointer Placement.

Includes Mobile Base for PJ-882 Jointer - 1610078

Wood Jointer Hand Plane with Hock Iron

Wood Jointer Hand Plane with Hock Iron Review

Wood Jointer Hand Plane with Hock Iron Feature

• Premium Grade Rosewood as Plane Body
• 500 mm body length, 44 mm Hock A2 Iron with Chip Breaker
• Wooden Wedge used to secure the iron in place
• Hone the iron prior to use, making thin shavings with a little pratice
• Fine craftsmanship representing zen philosophy in woodworking

You are looking at a find crafted wooden jointer plane equiped with Hock A2 Iron with chip breaker. It is very useful for straightening a long edge. This tool combines traditional oriental plane maker's skill and the fine quality of Hock iron. Although the iron is sharp out of the box, honing prior to first use is highly recommanded. Please wait for some time to let the wood settle before make any adjustment to the plane body. Due to the size the plane body, the wood will move a little bit with the climate change, a light coat of wax will help keep the plane in its perfect condition.

8 x 3/4 x 1/8 Jointer / Planer Knives, Jet, Powermatic, etc

8 x 3/4 x 1/8 Jointer / Planer Knives, Jet, Powermatic, etc Review

8 x 3/4 x 1/8 Jointer / Planer Knives, Jet, Powermatic, etc Feature

• Made of T1-High Speed Steel for extra long life
• set of 3

"Our T1 (AISI) steel offers 20% longer run times than M2-HSS. T1 is a well liked common European grade made of 18% Tungsten for extra long runs and better resistance to abrasive glue lines. T1 is the same hardness as M2 (63 Rc), making it easy to cut and profile grind. T1 is popular for mills that run mostly hardwoods or for softwood mills that want the ultimate in knife life and cutting performance. "

PORTER CABLE Variable Speed Bench Jointer 6"

PORTER CABLE Variable Speed Bench Jointer 6" Review

PORTER CABLE Variable Speed Bench Jointer 6" Feature

• Variable 6,000 to 11,000 rpm speed range allows y
• Poly-V belt drive for maximum transmission of pow
• Balanced cutterhead for smooth operation and main
• Two-knife cutterhead with jack-screw knife leveli
• Built-in chip chute directs dust and chips away f

Jointer has a two knife cutterhead with jackscrew knife leveling arrangement for easy replacement and adjustment of individual knives. A Built in cutterhead lock facilitates knife replacement and adjustment. The extra large table provides ample work support for surfacing stock up to a full 6" wide. Center mounted fence gives needed support throughout the cut. Specs: 120v, ac, 60 hz , cut capacity width is 6-1/8", cut capacity depth is 1/8", cutterhead speed is 12,000-22,000 cpm, variable-speed is 6,000-11,000 rpm, 2 knives, table length is 30", table width is 6-3/16", table height is 13-1/2". Includes: 10 amp, 120v motor, two-knife cutterhead, cutterhead guard and lock, center-mounted fence, push blocks, and wrenches.

JET 708476 Model JJP-12HH 12-Inch Planer/Jointer with Helical Cutterhead

JET 708476 Model JJP-12HH 12-Inch Planer/Jointer with Helical Cutterhead Review

JET 708476 Model JJP-12HH 12-Inch Planer/Jointer with Helical Cutterhead Feature

• Helical cutterhead with indexable carbide inserts for a superior finish and quieter cut
• Parallelogram design keeps the table close to the cutterhead for improved finish and allows for precise depth of cut adjustments
• Extra large aluminum extruded fence with centered controls for quick adjustments
• Extremely quick changeover between jointing and planning functions. Fence does not need to be removed
• Powerful 3 HP induction motor easily handles the toughest jointing and planning tasks

Combining a jointer and a planer into one machine, Jet's 12-inch JJP-12HH adds a helical cutterhead with indexable carbide inserts for a superior finish and quieter cut. Because it has no protruding knives, the helical cutterhead minimizes the clutter of chips flinging out from the machine--and it also greatly reduces tearout. It requires no tuning of individual knives since the cutterhead is fixed. Additionally, the innovative parallelogram design keeps the table close to the cutterhead, allowing for precise depth-of-cut adjustments.

Jointer/planer combination machine with helical cutterhead with indexable carbide inserts (view larger; also see schematic image with key features).

 

Built-in dust chute with 4-inch dust port (view larger).

708476 JJP-12HH Planer/Jointer with Helical Cutterhead At a Glance: Helical cutterhead with indexable carbide inserts for a superior finish and quieter cut Ultra-quick changeover between jointing and planing functions Powerful 3-horsepower induction motor Heavy-duty, one-piece, steel-closed stand with mounting tabs Five-year limited warranty

Versatile Combination Saves Space and Time

Whether building a backyard deck or a commercial structure, the Jet JJP-12HH 12-inch planer/jointer provides all-in-one precision-cut capability to help get your job done quicker. This machine makes a no-tool switch from jointer to planer in just a few quick motions, allowing you the capabilities of both machines without compromising your work space.

Both functions offer a full 12-inch width capacity and 55-inch tables, so no extra ripping process is needed when you switch between modes. And, in addition to its compact bench-top design, a rugged steel stand is included for those times floor positioning is more convenient.

Easy-Handling Adjustments for Maximum Accuracy

The Jet JJP-12HH's oversized hand wheel and knobs fit comfortably in your hand, allowing for extremely fine-tuned adjustments. The wide-spaced handles make it easy to stabilize stock to the heavy-duty, 43-inch-by-6-inch fence. Particularly handy for complex projects, the fence stays in place between function changes and sets easily for bevel cuts up to 45 degrees.

Expert Materials Offer Enhanced Operation

The Jet JJP-12HH runs on a heavy-duty 3-horsepower, 12.5-amp motor, supplying the power you need for a variety of cutting applications. Its table top is precision-flattened to ensure a smooth, even cut. The tough, cast-iron infeed and outfeed tables adjust individually to give the work piece superior support. Cutting is performed by the helical cutterhead with 56 inserts.

The JJP-12HH also includes a premium dust collection shroud, which rotates in both settings and has a standard four-inch outlet port, allowing for efficient dust collection that cuts your clean-up time to a minimum.

Top-Notch Features for Safe, Consistent Woodworking

During jointer operation, the bridge-style cutter guard's base-located adjustment knob allows wood to pass evenly beneath the guard, preventing you from pushing down directly over the cutter. The planer function's cutter head prevents kickback with gravity-operated fingers, while its metal infeed roller and rubber-coated outfeed roller maintain a consistent non-marring feed rate.

For both operation modes, the JJP-12HH features self-engaging locks that fall into place when you make the switch between functions for optimal security. For additional safety, the magnetic on/off switch has a built-in limiter to prevent start-up after power outages and while you switch between modes.

The JJP-12HH is backed by a five-year warranty.

What's in the Box

One Jet JJP-12HH 12-inch jointer planer.

Specifications

• Motor: 3 horsepower, 1 phase, 12.5 amp, 230 volt
• Jointer table size: 55 inches by 12 inches; 33-1/2 inches tall from floor
• Fence size: 43 inches by 6 inches
• Fence tilt: 90 to 45 degrees
• Planer table size: 21-1/4 inches by 12 inches
• Maximum cutting thickness: 8-3/4 inches
• Overall dimensions: 55 inches by 29-1/2 inches by 39-2/5 inches
• Stand footprint: 22 inches by 19-1/2 inches
• Warranty: 5 years, limited

Includes JJP-12HH 12-in Planer / Jointer with Helical Head - 708476

Grizzly G0452Z 6" X 46" Jointer w/ Spiral Cutterhead

Grizzly G0452Z 6" X 46" Jointer w/ Spiral Cutterhead Review

This 6" Jointer has some of the most remarkable features found anywhere. Starting from the ground up: built-in "kick-stand" mobile base (just push the lever down, push the machine where you want it and kick the lever back up!), built-in dust chute with 4" dust collection hood, quick adjusting lever on the infeed table, fine control handwheel on the outfeed table, positive stop at 1/8" on the infeed table, large 5" x 35" cast iron fence, rack and pinion fence adjustment, and an easy access switch with a removable safety key.